Single-column vertical lathe

Double-column vertical lathe

CNC Single-column vertical lathe

CNC Double-column vertical lathe

Products

CK5250 CNC Double Column Vertical Lathe

    

1.This series machine is suitable for finely and roughly turning cylinder and inner hole, inner and outer taper, surfacing, grooving, threading and curving of the ferrous, nonferrous metal and some kinds of non-metal materials with hard-alloyed and porcelain tools.

    

2.The main drive is provided by DC motor (two-step speed-change) or AC motor (16-step speed-change) to engage in table speed-change.

    

3.The table is thermal symmetric construction. The table spindle is centered by high-precision double-row short roller bearing whose radial clearance can be adjusted. With constant flow hydrostatic guideway and oil temperature device applied in axial direction, the table has features of higher swivel precision, larger loadability and smaller thermal deformation.

    

4.AC servomotors (connected directly with ballscrew) which drive the ball-screw via rated gear-set to control the heads to feed or rapid move composes machine's feed system.

    

5.The following guideway can be taken as horizontal guideway of vertical head:Linear dual-direction roller guideway, hydrostatic guideway, rolling & sliding guideway and slide guideway.

    

6.CNC control system provides SEMENSE or FANUC system. The other CNC systems are also can be provided on customers' requirement.

    

7.On customer's requirement, the followings can be supplied:Magazine, built-in tool setting device, boring & milling ability, table indexing and feed abilities, grounding ability, cooling device, left head and whole-loop control, etc.

    

Model	CK5225	CK5231	CKQ5240	CK5240	CKQ5250	CK5250	CKQ5263
Max. cutting diameter(mm)	2500	3150	4000	4000	5000	5000	6300
Table diameter(mm)	2250	2250	2830	3200	4000	4500	5000/5700
Max. height of workpiece(mm)	1600/2000	2000/2500	2000/2500		2500/3150	3150/4000	3150/4000
Max. weight of workpiece (t)	10	10	15	20	32	40	50
Max. torque of table (KN.m)	63	63	63	63	80	100	140
Range of table speeds(16 steps) (r/min)	2-63	2-63	2-63	2-63	2-63	0.42-42	0.34-34
Max. cutting force of rail head (KN)	30	30	35	40	45	50	60
Swivel of rail head	±30	±30	±30	±30	±30	±30	±30
Range of feed rates(mm/min)	0.2-145	0.2-145	0.2-145	0.2-145	0.2-145	0.2-145	0.2-145
Horizontal travel of rail head (mm)	1400	1725	2150	2150	2765	2765	3400
Ram travel of rail head (mm)	1000	1000	1250	1250	1250/1600	1600/2000	1600/2000
Rapid traverse of tool heads(m/min)	1550	1550	1550	1550	1550	2500	2500
Height of tool bar section ( W×H)(mm)	40×50	40×50	40×50	40×50	50×50	50×50	60×60
Power of main motor(kw)	AC:55	AC:55	AC:55	AC:55	AC:55	AC:75	AC:75
Weight of machine (t)	33/36	36/37	37/38	48	70/75	110/120	140/150